葡萄糖處理污水的正壓工藝!
來源：http://www.nttdr.com 日期：2021-02-16 發布人：admin
無論是工業葡萄糖還是食品葡萄糖，它們的作用和適用范圍都是很廣的，特別是工業葡萄糖，它在污水處理中都有一定地應用，還可以提高污水的處理效果，所以我們對其都比較關注。所以為了方便使用接下來就將其處理污水時的正壓工藝進行介紹。
Whether it is industrial glucose or food glucose, their role and scope of application are very wide, especially industrial glucose, it has a certain application in sewage treatment, but also can improve the treatment effect of sewage, so we are more concerned about it. Therefore, in order to facilitate the use, the positive pressure process of sewage treatment is introduced.
1、原料經過破碎之后，被破碎成小于10mm的細小顆粒。
1. After crushing, the raw material is crushed into small particles less than 10 mm.
2、經預消化的物料流入二級消化器進一步消化，然后污水處理專用葡萄糖流入電子計量皮帶秤與經流量計計量的水一起入預消解器。
2. The pre digested material flows into the secondary digester for further digestion, and then the special glucose for sewage treatment flows into the electronic metering belt scale and the water measured by the flowmeter into the pre digester.
3、污水處理專用葡萄糖已經消化成粉狀，由管式螺旋輸送機、鎖風閥送入高壓風機，由高壓風機送至粗粉分離器、分析機風選，粒度符合要求的細粉。
3. Glucose for sewage treatment has been digested into powder, which is sent to high-pressure fan by pipe screw conveyor and air lock valve, and then to coarse powder separator and analyzer for air separation by high-pressure fan. The particle size of fine powder meets the requirements.
4、細粉收集器收下至成品儲倉，污水處理專用葡萄糖經分析機分離的粒度不合格的粗粉入粗粉倉。
4. The fine powder collector is collected to the finished product storage bin, and the coarse powder with unqualified particle size separated by the analyzer for sewage treatment is put into the coarse powder bin.
5、再由卸料閥、電子計量皮帶稱計量后進入磨機粉磨，磨細后返回粗粉分離器、分析機循環風選。
5. Then it is measured by the discharge valve and the electronic metering belt, and then it enters the mill for grinding. After grinding, it returns to the coarse powder separator and the analyzer for circulating air separation.
以上就是葡萄糖處理污水的正壓工藝介紹，這種有機化合物在固態和液態時的作用效果是不一樣的，但是儲存不好的話，都容易出現變質現象，所以在不同的行業中使用時都要注意它保存的密封性和規范性，才能保持正常的使用效果。
The above is the introduction of the positive pressure process of glucose wastewater treatment. The effect of this organic compound in the solid and liquid is different, but if it is not stored well, it is prone to deterioration. Therefore, when it is used in different industries, attention should be paid to its sealing and standardization, so as to maintain the normal use effect.